Morning, everybody. Today is about the back end of things. Dump trucks, delivery trucks, loaders, dozers, rollers. Anything big on this site that goes in reverse.
Here's the problem in one sentence. The driver of a big machine often can't see what's behind it. And the beeping we hear all day becomes background noise. We stop hearing it. That's when it gets dangerous.
What the rule says for trucks
Washington's rule says a vehicle that can't see straight behind it, other than a regular car or pickup, can only back up two ways. Either it has a working backup alarm loud enough to hear over the site noise, at least fifteen feet behind it. Or somebody stands where they can see and signals the driver that it's safe.
And if it's so loud that the alarm doesn't do any good, then an observer has to be used. Period.
Dump trucks get an extra rule
Before a dump truck backs up, the driver has to make sure nobody's in the backing zone, and nobody is likely to walk into it. If someone is there, or might be, the truck backs only with an observer signaling, or with a camera that shows the driver the whole area behind.
People on the other side of a solid barrier, like a jersey barrier, a big piece of equipment, or a six-inch concrete curb, count as protected.
Who can be the observer
Almost anybody on site. Anyone except a person doing flagger duties. The flagger's job is traffic. Don't give them two jobs.
The observer has to be where the driver can see them or talk to them, and has to see the whole backing area. And they keep directing until the truck stops where it's going, or until nobody's back there.
Good practice: if you're the observer, make eye contact with the driver before you wave them back. And drivers, if you lose sight of your observer, stop. Don't keep rolling and hope.
Somebody always says, "That driver has backed into this spot a hundred times." Sure. And a hundred times, the spot behind the truck was empty. The rule is for the hundred-and-first.
Heavy equipment
For loaders, dozers, rollers and the rest, the rule is close to the same. If the operator can't see behind, the machine doesn't run in reverse unless there's a backup alarm you can tell apart from the noise, or an observer signaling it's safe. And here's a Washington detail. If it's so loud alarms don't work, amber strobe lights must be used.
Operators look the way they're going. In reverse, you look back and keep a clear view of your path.
Seat belts on equipment get used, by the operator and anybody riding. There are a couple of exceptions, like stand-up machines. And when a dozer is parked, the blade goes on the ground or on blocking.
For everybody on foot
This part is good practice, not the rule's words. Always make eye contact with the driver or operator before you come near a vehicle or machine. Do it again before you walk in front of it or behind it. That way they know you're there, or that you're about to cross their path. If you can't catch their eye, stay put and wait for a nod or a wave. Never assume they've seen you. Don't walk behind a running machine unless the operator has seen you and nodded. Don't stand between a machine and something solid. Wear your high-vis.
Talk it over
- Where on this site do trucks back up, and who is the observer when they do?
- And has anyone had a close call with a machine in reverse here? What would have stopped it?
Before you go
No eyes behind, no backing, unless there's a good alarm or a person guiding. On foot, make eye contact with the driver or operator first, every time.