Free toolbox talks
Read it out loud. Ask the questions. Collect the signatures.
Short talks for the weekly safety meeting, about five minutes each. Each one has the words to read, a few questions to talk over, and a printable version with a sign-in sheet.
For the person reading: read the plain text out loud, just as it is written. Lines in italics are notes to you, not to the crew. You do not need to be a speaker. Stand up, read it, ask the questions, collect the signatures.
One-page printable of this note (PDF), to hand to whoever leads the talk.
- Harness Inspection
- Fall Rescue Planning
- Fall Protection Basics: When Is It Required?
- Anchor Points
- Lanyards, Self-Retracting Lifelines and Connectors
- Extension Ladders: Setup and Inspection
- Stepladder Safety
- Eye and Face Protection
- Reporting Injuries: What Happens After Somebody Gets Hurt
- Hearing Protection and Noise
- Hazard Communication and Chemical Labels
- Lockout and Tagout Basics (Construction)
- Hand and Power Tool Safety (Construction)
- Housekeeping and Struck-By Hazards
- Heat Illness Prevention
- PPE Basics and the Hazard Assessment
- Scaffold Safety for Users
- Forklift Safety
- Respirator Basics
- Silica Dust Basics
- Bloodborne Pathogens on the Job
- First Aid on the Job — the Card, the Kit, the Call
- Trench and Excavation Safety
- Scissor Lifts and Boom Lifts
- Flaggers and Work Zone Traffic
- Fire Prevention and Extinguishers on the Job
- Confined Spaces — Know One When You See One
- Wildfire Smoke
- Extension Cords, GFCIs and Power Lines
- Lockout and Tagout for General Industry
- Rebar and Impalement Hazards
- Powder-Actuated Tools
- Grinders and Abrasive Wheels
- Gas Cylinders and Torch Work
- Working Around Cranes and Suspended Loads
- Backing Vehicles and Heavy Equipment
- Stairways on the Job
- Lead on the Job
- Temporary Heaters and Carbon Monoxide
- Toilets, Drinking Water and Washing Up
- Hard Hats
- Floor Holes and Covers
- Guardrails
- Pump Jack Scaffolds
- Rolling Scaffolds
- Nail Guns and Compressed Air
- Stacking and Storing Material
- The Weekly Safety Meeting and the Walk-Around
- Safety Data Sheets
- Demolition Basics
- Working Near Welding
- Ladder Jack Scaffolds
- Working Over or Near Water
- Masonry Walls and the Limited Access Zone
- Lighting on the Job
- Low-Slope Roofs — Warning Lines (Part 1 of 2)
- Steep Roofs — The Rule and Fall Restraint (Part 1 of 2)
- Circular Saws — Guards and Triggers (Part 1 of 2)
- Laser Levels and Lasers on the Job
- Asbestos — Know Before You Tear In (Part 1 of 2)
- Material Hoists — No Riders and Gates (Part 1 of 2)
- Jacks and Cribbing
- Concrete Pours — The Bucket and the Pump (Part 1 of 2)
- Bringing Your Own Safety Gear
- Ramps, Runways and Walkways
- Low-Slope Roofs — Safety Monitors and the Roof Edge (Part 2 of 2)
- Steep Roofs — Roof Brackets, Crawling Boards and the Edge (Part 2 of 2)
- Table Saws and Fixed Saws (Part 2 of 2)
- Asbestos — If You Find It and Who Does the Work (Part 2 of 2)
- Material Hoists — Loading and Keeping Out (Part 2 of 2)
- Concrete Pours — Tools, Forms and Shoring (Part 2 of 2)
- Digging Near Buried Utilities
- Gas Cans and Refueling
- Seat Belts, Riding and Rollover Protection
- Raised Beds, Blades and Parked Equipment
- Window and Wall Openings
- Hot Tar and Roofing Kettles
- Fall Clearance and Swing Falls
- Batteries and Battery Charging
- Keeping Exits Open During Remodels
- Winter Work — Ice, Snow and Wind
- Alcohol, Drugs and Medicine on the Job
- Job-Made Wooden Ladders — Building and Checking (Part 1 of 2)
- Lifting People on a Forklift
- Scaffolds Near Power Lines
- Job-Made Wooden Ladders — Setting Up and Using (Part 2 of 2)
- Falling Objects From Scaffolds
- Electrical Panels — Keep Clear and Keep Closed
- Rolling Ladder Stands
- Working Higher on a Scaffold — Boxes, Ladders and Stilts
- Fixed Ladders
- Working From a Ladder
- The Fall Protection Work Plan
- Cutting Fiber Cement Siding
- Conveyors on the Job
- Positioning Devices for Rebar and Form Work
- Speaking Up and Refusing Unsafe Work
- Clearing Brush and Poison Plants
- Jackhammers and Chipping Concrete
- Hauling and Storing Ladders
- Rope Grabs on a Vertical Lifeline
- When L&I Comes Out — DOSH Inspections
- Propane Cylinders on the Job
- Safety Nets and Catch Platforms
- Leading Edge Work
- Tilt-Up and Precast Panels — Working Near the Lift
- Working Near Pile Driving
- Working Below the Steel Crew
- Working Around the Top of an Excavation
- Company Truck Drivers — The Walk-Around and the Truck Report
- Phones and Texting While Driving a Truck
- Railroad Crossings for Work Truck Drivers
- Truck Drivers — Roadside Breakdowns, Flashers and Warning Triangles
- Securing Cargo on a Work Truck or Trailer
- Machine Guards in the Shop
- Hours of Service — Driving Limits for Truck Drivers
- Keeping Floors and Walkways Clear in the Shop
- Driving a Truck in Bad Weather
- Flammable Liquids in the Shop
- Loading Trucks and Trailers With a Forklift — Dock Plates and Wheel Chocks
- Alcohol, Drugs and Medicine for Work Truck Drivers
- Cords, Plugs and Panels in the Shop
- After a Crash in a Work Truck — What the Driver Does
- Compressed Air and Air Tools in the Shop
- Seat Belts and Riders in a Work Truck
- Running an Electric Pallet Jack in the Shop or Warehouse
- Hauling Gas Cans and Propane on a Work Truck
- When the Alarm Sounds in the Shop — Raising the Alarm and Getting Out
- The DOT Medical Card for Work Truck Drivers
No one to lead it?
Short on time, or no one to lead it? Doc and Red can run these talks for you in the R Safety Hub app.
Get started