R Safety Hub R Safety Hub Your prescription for a safer workplace

Hauling and Storing Ladders

Lines in italics are for the reader, not the crew. If you can, read this one standing next to the truck rack. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. We've done setting up ladders and climbing them. Today is about the time a ladder isn't being climbed: riding the truck to and from the job, and sitting in the shop overnight and on weekends.

A lot of ladder damage doesn't happen on the job. It happens at sixty miles an hour on the freeway, and in the back of the trailer under a pile of lumber.

On the truck

Washington's rule says ladders get properly supported while they ride on a vehicle. On a truck rack, they're secured in a fixed position, tied down so they can't slide around, rub or chafe.

That rubbing is sneaky. A ladder bouncing on a rack for a few hundred miles wears through rails and rung joints, and you won't see it from the ground. The rule's own note says tying the ladder at each support point cuts down a lot of road damage.

And a ladder that falls off the truck, even once, gets looked at. The rule says when a ladder falls off a vehicle, the person using it starts an inspection by a competent person before anyone climbs it again. Same if it tips over, gets hit by a truck or machine, or has been used around chemicals that eat metal. Tell your supervisor so that gets done. Don't just throw it back on the rack.

Somebody always says, "It only fell off at the stop sign." Great. It still fell.

In storage

The rule says nothing gets piled on a ladder in storage. Not lumber, not boxes, not the other ladders' extra weight on top of a stepladder. The rule's note says store them on racks that hold them up at enough points so they don't sag, and keep wood ladders away from heat and damp.

Look it over before you use it

Because of all that, a trained user checks the ladder before the first use of every shift, and again during the shift if something happens. Tight joints. Rungs and steps not bent, broken or missing. Rails not bent, broken or split. Bolts and rivets in place. Moving parts, spreader locks, feet, hardware and ropes working and not worn out. No corrosion on metal parts. The rule lists a few more; those are the common ones. A ladder with structural damage or another dangerous defect gets marked or tagged "do not use," and comes out of service. And the crew never repairs a bent or split side rail. The rule bans it, and its note says only the maker can fix a side rail on a store-bought ladder.

Two more things

Don't tie or bolt two ladders together to make a longer one, unless the maker says it's built for that and you have the hardware made for it.

And don't paint a wood ladder. Paint can hide cracks. The rule allows only a little marking on one side rail, for your company name or warnings.

Talk it over

  1. How are our ladders tied on the rack right now, and do they rub anywhere?
  2. What's the hardest part of getting our ladders on and off the truck, and what would make it easier or safer?

Before you go

Tied tight on the rack, nothing piled on it in storage, checked every shift, and if it falls off the truck, it gets inspected before anyone climbs it.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-876-30020(1), (2) and note (properly supported while transported on vehicles; in a truck rack positively secured in a fixed position that prevents chafing or abrasion; note: securing to each support point greatly reduces road-shock damage); 296-876-30015 and note (material not put on ladders in storage; note: racks with enough supporting points to prevent sagging; wood ladders away from heat, moisture or dampness); 296-876-30005(1)(a) to (j), (l), (2), (3)(a), (b), (4) and Table 1 (good, usable condition list; wood ladders not coated with an opaque covering except minimum identification and warning information on one face of one side rail; trained user inspects before initial use each shift; tips over, falls off a structure or vehicle, struck by an object, or corrosive use calls for a competent person inspection; damaged ladders marked or tagged "do not use" and removed from service); 296-876-30010(1), (2) and note (repairs restore original design; repairs to a defective side rail prohibited; note: side rail repair only by the manufacturer); 296-876-40045(1) (sections not tied or fastened together to make longer ladders unless the maker endorses it and hardware fittings are designed for it). Federal: 29 CFR 1926.1053(b)(15) (competent person inspection periodically and after any occurrence that could affect safe use), (b)(16) (defective portable ladders marked or tagged "Do Not Use" and withdrawn from service). No federal transport or storage sentence was found in 1926.1053. "The other twenty-three hours," "a lot of ladder damage doesn't happen on the job," the freeway and trailer lines, "that rubbing is sneaky," the stop-sign line, the example of a stepladder under other ladders, "paint can hide cracks" (our plain reason for the opaque-coating rule) and the shortened inspection list in plain words are plain explanation or good practice, not rule text.