R Safety Hub R Safety Hub Your prescription for a safer workplace

Working Near Welding

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about welding. Not doing it. Working near it.

There is welding going on upstairs today. We are not the welders. But the light, the sparks and the smoke do not stay with the welder. So here is how we stay out of it.

The light

A welding arc can burn your eyes. Welders call it welder's flash. You do not have to be the one welding. Catching the arc, or its reflection off something shiny, can do it.

Sunglasses and regular safety glasses are not made for that light. Only a welding lens is. So for us it is simple. Do not look at the arc. Walking past an opening, or up the stairs toward the welding, look away and keep moving, or go another way.

Washington's rule says welding gets screened, whenever practical, to protect the people working nearby. Those screens and curtains are for us. Do not move them, and do not walk around them to take a peek. If the welding is open to where you are working and there is no screen, tell your supervisor.

Sparks and slag

Hot slag falls and bounces. The rule says where it could land on other workers, they get protected: overhead cover, a barricade where it lands, or another way that works. A barricade under welding means something hot is coming down. Stay out. And as good practice, do not leave material, gas cans or your jacket under it either.

The smoke

Welding smoke is not just smoke. Depending on the metal and its coating, it can carry things like zinc or lead. The rule says anybody breathing the same air as the welder gets the same protection as the welder. So if the welder is in a respirator and you're standing in their smoke, you shouldn't be there unless you have on the same protection the welder has. Move away, or ask your supervisor.

The cables

Welding leads run across floors and up stairs. As good practice, do not drive over them, stack on them or yank them out of your way. If one looks cut or burnt, tell your supervisor. The rule says a cable that needs repair does not get used.

Talk it over

  1. Where is welding happening today, and what is our way around it?
  2. Is anything of ours sitting under the sparks?

Before you go

Do not look at the arc. Stay out from under the sparks. Stay out of the smoke. Leave the leads alone.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Sections used from the list below: screens (296-155-405 shielding), slag protection for other employees, same-atmosphere protection, cables in need of repair; the welder-only detail is no longer spoken. Zinc and lead as examples come from the rule's named metals. Cable care lines (drive over, stack, yank) and the gas cans line are good practice. Federal: 29 CFR 1926.351(a) to (e), 1926.353(a)(6), (b)(1), (b)(2), (c), (d), (e), 1926.354(a), (b), (c). The molten slag line (WAC 296-155-405(6)) and the clothing section (WAC 296-155-407) were read in the Washington text; no matching sentence was seen in 29 CFR 1926.351, .353 or .354. "A cuff catches sparks" follows the rule's own words about sparks lodging in cuffs. "Oxygen is not air," "plain welding," "the wire-feed, shielding-gas kind many people call MIG" and "stick welding" (the rule says inert-gas metal-arc welding and shielded metal-arc welding) are plain explanation, not rule text. The open-air respirator line reads "such operations" in 415(3)(c) as covering every metal in (3)(a) and (3)(b), the stricter reading. "Zinc-coated metal is on that list" follows 415(3)(a)(i). The rule's eye protection part points to standards this talk does not describe.