Morning, everybody. Today is the rolling scaffold. The baker, the rolling tower, whatever your crew calls it. If you hang board, paint, or run pipe and wire overhead, you have probably spent a lot of hours on one.
It is a great tool. It has wheels, which is the best thing about it. It has wheels, which is also the worst thing about it.
When you are working on it
Washington's scaffold rule says the wheels and casters are locked, or held some equal way, to keep the scaffold from moving while it is being used. Every time you stop, lock them. All of them, not just the two you can reach with your foot.
The caster stems are pinned or secured in the legs, so a wheel cannot drop out when you roll over a bump.
If the platform needs leveling, the rule says screw jacks or something equal. Not a chunk of two-by-four and a brick. The rule says unstable objects are not used to hold up a scaffold.
Tall and narrow
A scaffold gets tippy as it gets taller. The rule draws a line. Once a supported scaffold is taller than four times its narrowest base, it has to be kept from tipping, by guying, tying, bracing or something equal. If outriggers are used, they count as part of the base.
Moving it
Before it moves, everybody on it is told.
You push it down low. The rule says as close to the base as you can, and no higher than five feet off the floor. So hauling yourself along by the ceiling from up top is not how the rule says to move it.
It gets steadied against tipping while it moves.
And no pushing it with a forklift, a truck or a bolted-on motor, unless the scaffold was designed for that.
Riding it
Here is the rule on riding. Nobody rides a scaffold while it moves unless every one of these is true.
The floor is within three degrees of level, and free of pits, holes and things to hit.
Nobody is standing on a part that sticks out past the wheels.
If outriggers are used, they are on both sides.
The scaffold is no taller than two times its narrowest base, unless it was designed and built to a recognized stability test.
And if power is used, it drives the wheels directly, at no more than one foot per second.
That is a long list. Your company may simply say nobody rides. That is stricter than the rule, and that is allowed. Either way, if you cannot tick every box, you climb down first.
Up top
At ten feet or more, people on a scaffold are protected by guardrails or personal fall arrest.
No boxes or barrels on the platform to get a little more height. And the rule only allows a ladder on top of a scaffold on a large area scaffold, which a rolling tower is not.
A competent person looks it over before each shift, and after anything that could have damaged it.
Good practice
This part is good practice, not the rule's words.
Before you roll, look at the path. Cords, hoses, floor boxes, a change in the slab. And look up, for anything the top could hit.
Take loose tools and material off the platform before it moves.
Talk it over
- On this job, do we ride the scaffold or climb down? Does everybody know which?
- Who checks the wheel locks and the caster pins before the first person climbs?
Before you go
Wheels locked before you climb. Push it low. And if you cannot tick every box, nobody rides.