Morning, everybody. Today is lead. The lead in old paint, old coatings, and some old materials we tear off, sand, scrape, cut and burn.
Lead dust doesn't look any different from regular dust. It has no smell. Which is exactly why it gets ignored.
Where we run into it
Washington's lead rule covers all construction work where someone could be exposed. It names painting and decorating, demolition, removal, renovation and repair of anything that contains lead.
For a lot of crews, that means old paint. Older buildings may have lead paint under the newer coats. You can't tell by looking. Only a test tells you. So if we're working on older painted surfaces and nobody has said it's been tested, ask before you start.
The tasks that kick it up
The rule lists jobs that make a lot of lead dust or fume when lead paint is present. Until the company has measured the exposure, people doing these jobs are treated as if they're over the limit, and they get protection, including respirators.
On the list: scraping by hand. Sanding by hand. Heat guns. Tearing out by hand, like drywall demo. Power tool cleaning, with or without dust collection. And at the top of the list, where lead is present: abrasive blasting, welding, cutting and torch burning.
So that old painted beam you're about to cut with a torch? That's one of the highest-risk lead jobs in the rule.
How it gets in
The state says lead gets into your body two main ways. Breathing it in, which is the big one. And swallowing it. You swallow it by eating, drinking, smoking or chewing with lead dust on your hands or your food.
Lead also builds up in your body over time, and some of the damage shows up only after years. That's the part worth taking home.
For the person reading: health questions go to a doctor. This talk does not give medical advice.
The habits that protect you
Where exposure is over the limit, no food, no drinks, no tobacco and no cosmetics in the work area. Wash your hands and face before you eat, drink or smoke. And where there are no showers, wash your hands and face at the end of the shift.
Here's one I want everybody to remember. You don't leave the job wearing the protective clothing you had to wear during the shift. Work clothes stay at work. That dust doesn't know it's quitting time. If it's on your clothes, it rides home in your truck and walks into your house.
Your lunch does not belong on the same tailgate as the sanding dust. I don't care how good the sandwich is.
Cleaning up
Clean lead dust with a HEPA vacuum, or another method that keeps dust out of the air. Sweeping and shoveling only if vacuuming has been tried and doesn't work. And no blowing it off with compressed air, unless there's a ventilation system set up to catch it. A leaf blower is not a ventilation system.
Talk it over
- Are we working on any older painted surfaces right now, and do we know if they've been tested?
- And where do we eat lunch, and how far is it from where the dust is?
Before you go
If it's old paint, ask before you scrape, sand, heat or cut. Wash before you eat. Work clothes stay at work.