R Safety Hub R Safety Hub Your prescription for a safer workplace

Batteries and Battery Charging

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about the big batteries on the job. The ones in the forklift, the lifts and the equipment, and the charging station where they get plugged in at night.

A battery looks like a box that sits there doing nothing. But the kind with caps you can open, the unsealed kind, holds acid. And when it's charging, it gives off gas. The rule talks about keeping that gas from building up into an explosive mix. So, a box of acid that makes explosive gas. Worth a few minutes.

Where charging happens

Batteries get charged in an area set aside for it. Not wherever there's an outlet.

That area needs good airflow, so the gas from charging spreads out and can't build up.

Where forklift batteries charge, the rule says no smoking, and precautions against open flames, sparks and arcs. That's good sense anywhere batteries charge. Our advice: no grinding or welding next to the chargers.

The chargers get protected so a forklift can't run into them.

There has to be a way to flush and neutralize spilled battery acid, and fire protection, right there.

Handling acid and batteries

If you're handling batteries or battery acid, the company provides a face shield, an apron and rubber gloves, and you wear them. All three.

There has to be a place to drench your eyes and body within twenty-five feet of where batteries are handled. Know where it is before you need it.

While it charges

The vent caps stay in place and working while a battery charges. They keep acid from spraying out.

For forklift batteries, the rule adds a few more. The truck is parked right with the brake on before charging or changing the battery. The battery cover gets opened to let heat out. Never use a flame, like a lighter, to look at the acid level. Keep tools and other metal off the top of an open battery. A wrench across the posts makes sparks, and sparks plus that gas is a bad combination.

Mixing acid? The rule is short. Acid into water. Never water into acid. And the company provides a tilter or siphon for handling the acid, so nobody is pouring from a heavy jug by hand.

For moving batteries, the company provides a hoist, a conveyor or similar equipment. Use it. Not your back and a prayer. And a battery that goes back in gets seated and secured.

If acid gets on you

Acid on you or in your eyes? Get to the eyewash or shower now.

Keep the water running at least fifteen minutes. Set a timer, because it feels longer than that.

While you flush, pull off wet clothes, shoes and jewelry. A buddy can help, but keep the water on the skin.

Eyes: hold the lids open. Use the eyewash, not the shower, for eyes. Contacts out if they come easy, but don't stop flushing to do it.

Don't try to cancel the acid with baking soda or anything else. Water only.

Acid in the eyes, or a burn that's big or blistering: call 911.

Every acid burn gets seen by a medical person, even a small one. Tell your supervisor.

Talk it over

  1. Where's our charging area, and where's the nearest eyewash to it?
  2. Has anybody seen tools or metal sitting on top of a battery? What would you do?

Before you go

Charge it in the charging area, with airflow, caps in, no sparks or smoking, shield, apron and gloves on, and know where the eyewash is.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-155-437(1)(a) (unsealed batteries in vented enclosures or well-ventilated rooms), (1)(b) (ventilation to diffuse gases and prevent an explosive mixture), (1)(e) (face shields, aprons and rubber gloves provided and worn), (1)(f) (quick-drenching facilities for eyes and body within 25 feet of battery handling areas), (1)(g) (flushing and neutralizing spilled electrolyte; fire protection), (2)(a) (charging in designated areas), (2)(b) (charging apparatus protected from damage by trucks), (2)(c) (vent caps in place and functioning during charging); WAC 296-155-615(3) (industrial trucks in construction meet chapter 296-863 WAC); WAC 296-863-30035 (designated charging areas with flushing, fire protection and ventilation; no smoking; precautions against open flames, sparks or arcs; chargers protected from PITs; conveyor, overhead hoist or equivalent to handle batteries), 296-863-30040 (PIT positioned with brake on; no open flames to check electrolyte; vent caps functioning; covers open to dissipate heat; acid into water, never water into acid; carboy tilter or siphon; tools and metal kept off uncovered batteries; reinstalled batteries positioned and secured). Federal: 29 CFR 1926.441(a), (b). Differences seen: Washington adds "workers must wear them" to the face shield, apron and glove line; the no-smoking and spark lines come from the forklift chapter, which the talk applies to charging areas generally as our reading. "A box of acid that makes explosive gas," "a wrench across the posts makes sparks," "pouring from a heavy jug by hand," and "use it, not your back and a prayer" are plain explanation or advice, not rule text (30035(5) and 30040(4) put the duty on the employer to provide the equipment).