R Safety Hub R Safety Hub Your prescription for a safer workplace

Working Around the Top of an Excavation

Lines in italics are for the reader, not the crew. If you can, read this one standing near the edge of the dig, at a safe distance. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Most trench talks are about what happens down in the hole. Today is about up top: walking around the hole, crossing it, and working near the machines that dig it. A lot of us never go in the trench, but we work around it all day.

Nobody under the bucket

Washington's rule says nobody stands under a load being handled by lifting or digging equipment. That includes the excavator bucket swinging over to the truck. And when a dump truck is being loaded or unloaded, everyone stands away from it, so nobody gets hit by spills or falling dirt and rock. The driver may stay in the cab only if the truck is equipped to protect them.

So if you're waiting for the excavator to finish, wait outside its swing and away from the truck. And if you're around traffic, the rule says you wear high-visibility gear.

Machines near the edge

The rule says when equipment works next to an excavation or has to come up to its edge, and the operator can't clearly see that edge, there has to be a warning system: barricades, hand or mechanical signals, or stop logs. If you're the one giving signals, that's your whole job. Don't stand where the machine or the edge can get you.

The rule also says dirt, materials and equipment stay at least two feet back from the edge, or get held back, so nothing rolls in on the people below. If you set something down near the hole, set it back.

Crossing over

If people or equipment cross over an excavation, the rule says there's a walkway for it. Not a sheet of plywood somebody threw down, not a jump. And if that walkway is four feet or more above the level below, it gets guardrails that meet the fall protection rule. Washington says four feet; the federal rule says six.

Falling in

The fall protection rule says anyone standing or working in the affected area of a trench or excavation with a fall of ten feet or more needs fall protection, if they're not directly part of the digging, or if they're up on the shoring or a structure in the hole. People directly part of the digging include the foreman, the signal person, the person hooking on pipe and the grade person, standing on the ground at the top edge.

And excavations off by themselves, away from the main work, get a barrier around them. Wells, pits and shafts get barricaded or covered. When the exploring is done, temporary wells, pits and shafts get filled back in.

The competent person checks the excavation and the area around it every day and after every rain. If you see cracks at the top or the edge sagging, tell them.

Somebody always says, "I'll just hop across, it's only three feet wide." Three feet wide, eight feet deep. Use the walkway.

Talk it over

  1. Where does the excavator swing today, and where do we stand to stay out of it?
  2. What would make it easier and safer for us to get across and around our excavation?

Before you go

Never under the bucket, stay away from the truck being loaded, two feet back from the edge, and cross on a walkway with rails.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-155-655(4) (employees exposed to vehicular traffic provided with and wear high-visibility garments per 296-155-200); (5) (no employee underneath loads handled by lifting or digging equipment; employees stand away from any vehicle being loaded or unloaded; operators may remain in cabs equipped per 296-155-610(2)(g)); (6) (warning system such as barricades, hand or mechanical signals, or stop logs when mobile equipment operates adjacent to or approaches the edge and the operator lacks a clear and direct view of the edge); (10)(b) (materials and equipment kept at least two feet from the edge, or retaining devices, or both); (11)(a) (daily inspections of excavations, adjacent areas and protective systems by a competent person, before work, as needed and after every rainstorm); (12)(a) (walkways where employees or equipment cross over excavations; guardrails per chapter 296-880 where walkways are four feet or more above lower levels); (12)(b) (adequate barrier physical protection at remotely located excavations; wells, pits and shafts barricaded or covered; temporary wells, pits and shafts backfilled after exploration); section amended WSR 26-09-113, effective 6/1/26. WAC 296-880-30005(2)(b) (fall protection at 10 feet or more for employees in the affected area of a trench or excavation not directly involved with the excavation process, or on the protective system or any other structure in the excavation; exceptions for those directly involved on the ground at the top edge and where sloping is the protective system; the note's list of persons directly involved). Federal: 29 CFR 1926.651(e), (f), (j)(2), (l) (federal walkway guardrails at six feet). "Wait outside its swing," "if you see cracks at the top or the edge sagging, tell them," "that's your whole job, don't stand where the machine or the edge can get you," "if you set something down near the hole, set it back," "not a sheet of plywood, not a jump," and the hop-across joke are plain explanation or good practice, not rule text.