R Safety Hub R Safety Hub Your prescription for a safer workplace

Low-Slope Roofs — Safety Monitors and the Roof Edge (Part 2 of 2)

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. This is part two about low pitched roofs: four in twelve or less. Part one covered the warning line, the rope on stands that warns and does not catch anybody. Today is the safety monitor, and what we do with machines, materials and skylights near the edge.

The safety monitor

During roofing work on a low pitched roof, a safety monitor may be used together with a warning line, and only for roofing work. On a roof less than fifty feet wide, a roofing crew may use the monitor alone.

The rule spells out the monitor's job: They're a competent person, trained in both the monitor and the warning line system, and named in the fall protection plan. They're easy to pick out from the rest of the crew, and they have the final say on fall protection. They have no other duties while monitoring. They stand where they can see you and talk to you in a normal voice. They watch no more than eight exposed workers at a time. They warn you when it looks like you haven't seen the edge, or you're doing something unsafe.

Your part is simple. When the monitor warns you, you move. Right then. No debate. The rule says workers must promptly follow fall hazard warnings.

If you are working out past the warning line under a monitor, you wear the bright, matching gear that sets you apart from the rest of the crew.

And a safety monitor is not used when bad weather makes things more dangerous. The rule says adverse weather that creates more hazards. Think wind, rain or ice.

Machines, materials and holes

Machines are used or stored only where people are protected by a fall arrest or fall restraint system. Not where the only protection is a safety monitor.

Material is not stored within six feet of the roof edge, unless there is a guardrail at the edge. If anyone could be working or walking below, that guardrail gets a toeboard.

The hoist is never your anchor. Not for a lanyard, not for a restraint line.

And skylights. A skylight is a hole with a lid that looks solid. An open skylight hole, or a skylight that can't hold twice the weight that could be put on it, needs one of three things: a standard-strength cover, a guardrail on all sides, or you on a fall restraint or fall arrest system. Our own good practice: never sit on one, never step on one. Somebody always says, "It's just for a second." Gravity is quick too.

Talk it over

  1. Who is the safety monitor today, and what else have they been asked to do?
  2. Where is the machine and material area, and what protects people near the edge?

Before you go

When the monitor says move, move. Machines and material stay back from the edge. A skylight is a hole.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-880-095(34), (52) (low pitched roof four in 12 or less; safety monitoring system); 296-880-095(48) (roofing work); 296-880-20005(3)(b) (skylights); 296-880-10010(2) (holes an employee can trip into, step into or step through: guard with a cover of standard strength or a standard guardrail system); 296-880-30005(1)(a) and its exception (safety monitoring system may be used for roofing work on a low pitched roof); 296-880-40045 (monitor named in the fall protection work plan, trained, competent person, no other duties, clear view and normal voice, not more than eight exposed workers, warns; not used in adverse weather; workers outside the warning line wear highly visible, distinctive, uniform apparel; employees promptly comply); 296-880-40080(4), (5), (6) (mechanical equipment, hoist not an anchor, material six feet from the edge, toeboard if people could be below). Federal: 29 CFR 1926.501(b)(10), 1926.502(h); 1926.501(b)(4)(i) (holes, including skylights, more than 6 feet up: personal fall arrest, covers or guardrails). The opening line about part one ("warns and does not catch") follows from the definition of a warning line system (296-880-095(72)), as in Part 1. Part 1 of 2 covers the warning line itself.