R Safety Hub R Safety Hub Your prescription for a safer workplace

Leading Edge Work

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about the leading edge. That's the edge of a floor, a roof deck or formwork that keeps moving out as we lay down the next sheet or set the next panel. Sheathing a floor, decking a roof, building forms. The edge is never in the same place twice, which is exactly why it catches people.

Who it applies to

Washington's rule has a special height for the people actually building the leading edge. If you're one of them and you could fall six feet or more, you need fall arrest, fall restraint, or a positioning system. That means a harness and a line set up right, not just "being careful."

Everybody else on that deck who isn't building the edge goes by the regular Washington rule, which starts at four feet. So the person carrying sheets up, or the electrician waiting to start, is on the four-foot rule, not the six.

And once ten feet or more is in play, the company needs a written fall protection work plan for the job. If you haven't been walked through it, ask.

The warning line

On a low-pitched deck, the rule lets the company string a warning line to split the leading-edge crew from everybody else. It goes up at least six feet back from the leading edge, and no more than twenty-five feet back. It's not a bare rope: the rule wants it flagged so you can see it, and hung between about three feet and three feet nine inches off the deck.

Between that line and the edge is the leading-edge crew's area. With a warning line, they're tied off for fall arrest or in restraint; positioning doesn't count there. If you're not on that crew, you stay on your side of the line, and the other open edges on your side still need protection at four feet. The line is a fence for people, not a clothesline for cords and tools.

When the work stops

Here's the part people miss. The rule says a leading edge only counts as one while it's actively and continuously being built. The way we read that: stop for lunch, for the day, or because the material ran out, and it's an ordinary open edge. Then it needs the regular four-foot protection, like a guardrail or tie-off, before anyone works near it.

Somebody always says, "We'll be right back to it." Great. The rule doesn't wait for you. Neither does gravity.

Good habits

Good practice, not the rule: keep your line where it won't drag across the edge. Don't step backward on a deck; turn and look. Watch for sheets that aren't nailed yet. They slide. And keep the deck clear, because you can't watch the edge and your feet at the same time.

The basics

Look over your harness and line before every use, and pull anything damaged. You get trained on this gear before you use it. And the company has to plan for a fast rescue if someone falls.

Talk it over

  1. Who on this deck is leading-edge crew today, and who's on the four-foot rule?
  2. What would make it quicker and easier to protect our edge every time we stop, even just for lunch?

Before you go

Six feet if you're building the edge, four feet for everybody else, stay behind the warning line, and when the work stops, the edge gets protected.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-880-095(31) (leading edge defined; considered an unprotected side or edge when not actively and continuously under construction); 296-880-30005(1)(b) and exception (fall arrest, restraint or positioning at six feet or more while constructing a leading edge; employees not directly involved comply with 296-880-200, four feet); 296-880-20005 (four feet or more); 296-880-10020 (written fall protection work plan at ten feet or more); 296-880-40040(1), (2) (lines around all unprotected sides and edges of the work area; flagged at not more than six-foot intervals or high-visibility tape; lowest point not less than 36 inches and highest not more than 45 inches above the surface; stanchion and strength specs), (1)(b) (warning line for leading edge work on low pitched surfaces, not less than six nor more than 25 feet from the leading edge, separating leading edge workers from other work areas; fall arrest or restraint for those constructing the leading edge); 296-880-10005(2)(a), (4) (inspect before each use, remove defective; prompt rescue or self-rescue); 296-880-10015 (training). Federal: 29 CFR 1926.501(b)(2)(i) (federal: guardrail, net or personal fall arrest at six feet for those constructing a leading edge, with a fall protection plan where infeasible under 1926.502(k)). "Never in the same place twice," "not just being careful," "the way we read that: stop for lunch, for the day, or because the material ran out" (our plain reading of 095(31)), "like a guardrail or tie-off" (examples of 296-880-20005 systems), "about three feet and three feet nine inches" (36 to 45 inches), "a fence for people, not a clothesline," the lunch and gravity lines, and the "Good habits" part (line off the edge, don't step backward, unnailed sheets slide, keep the deck clear) are plain explanation or good practice, not rule text.