R Safety Hub R Safety Hub Your prescription for a safer workplace

Scaffold Safety for Users

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about scaffolds. Not building them. Using them. Most of us aren't the scaffold crew. We just climb up and go to work. So this one is for the people standing on it.

A scaffold is a temporary floor in the air. It's only as good as the last person who touched it. So let's talk about how to tell if it's ready for you.

Who builds it, and who checks it

A scaffold gets put up, moved, changed or taken down only under the direction of a competent person who knows scaffolds, using trained, experienced workers they pick. Not whoever's handy.

And a competent person inspects it before every shift. Every shift. Also after anything that could have hurt it, like a truck backing into it, or a big wind. If you don't know whether it was checked today, ask before you climb.

If you see something moved, missing or loose, don't fix it yourself. Tell the competent person. Changing a scaffold is their job.

Getting up

If the platform is more than two feet up or down from where you're standing, there has to be a real way on. A ladder, stairs, a ramp, or the built-in access on the frame.

Cross braces are not a ladder. The rule says it in plain words. They look like a ladder, they're right there, and they're not for climbing.

The platform

The working platform is fully planked. No more than about an inch between boards, or between the boards and the frame. A missing plank is a hole.

Don't stack boxes, buckets or anything else on the platform to reach higher. If you need more height, the scaffold needs to change, not your footing.

Keep the platform clear. Debris can't pile up. And if it's covered in snow, ice or anything slick, nobody works on it except to clean it off.

Falls

If you could fall ten feet or more from a scaffold, you need guardrails or a personal fall arrest system. That's a Washington rule and a federal rule.

Be careful about leaning off the edge or taking a rail out to pass material up. If a rail comes off, the protection comes off with it.

Weight

Every scaffold has a limit, set by the maker or by the person who designed it. Don't go over it. A pallet of material plus three people plus a mixer adds up fast.

Weather and footing

No working on a scaffold in a storm or high wind, unless a competent person says it's safe and you're tied off or there are wind screens.

Down at the bottom, the legs sit on base plates on solid footing or mudsills. Not on concrete blocks, loose bricks, barrels or boxes. The rule names those as unstable. If it's a rolling scaffold, the wheels get locked before anybody goes up.

The thing about scaffolds is, gravity always shows up for work. Every day. On time.

Talk it over

  1. Do you know who the competent person is for the scaffolds on this job?
  2. Has anybody climbed the cross braces this week? Honest answers, nobody's in trouble.

Before you go

Checked this shift, a real way up, full planks, rails in place, and nothing makeshift underneath.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-874-20004 (competent person), -20008 (fully planked, one inch), -20020 (access over two feet; no cross braces), -20034 (inspection before each shift), -20038 (loads), -20042 (no makeshift height), -20048 (weather), -20050 (debris, snow and ice), -40004, -40006 and -099 (footing, base plates, mudsills, locked wheels; "unstable objects" defined as including barrels, boxes, loose brick and concrete blocks), -20072 (training); WAC 296-880-30030(1) (fall protection at ten feet). Federal: 29 CFR 1926.451(c)(2), (e)(1), (f)(3), (f)(8), (f)(12), (f)(14), (g)(1). "Don't fix it yourself, tell the competent person" and the rail-removal caution are good practice drawn from the competent-person rule, not quoted rules.