Morning, everybody. Today is about the crane. Not running it. Being around it.
Most of us will never sit in the seat. But a lot of us will work near one: setting trusses, landing a bundle of material, or just walking past the swing of it to get to the truck. So today is about where to stand, and where not to.
The fall zone
The rule has a name for the danger area. It's called the fall zone. It's the area, including right under the load, where the load could reasonably land if something went wrong.
Think about that for a second. Not just straight under it. If a sling lets go while the load is swinging, it doesn't drop straight down. It goes where it was headed.
Washington's rule says when a load is hanging there, not moving, nobody is in the fall zone except the people hooking it, unhooking it, guiding it, or making the first connection to the building. And when a load is being landed, only the people needed to receive it are in there. Everybody else, step back.
Good practice for everybody: never walk under a load. Moving or still. Go around. It takes ten more seconds.
Somebody always says, "It's only up there for a second." So is a dropped coffee cup.
The swing
The crane doesn't just lift. It turns. The back end of a crane, the part that swings around behind it, can hit you or pin you against something. And the operator may not be able to see back there.
The rule says the company marks that swing area with lines, railings or barriers, and trains the people working near the crane to recognize it. So when you see that line or that tape around the back of a crane, it's not decoration. Don't step over it.
And if you ever have to go into that area where the operator can't see you, the rule says the operator gets told first. And the operator doesn't swing until they know you're clear.
Anybody can say stop
This is the part I most want you to remember.
Normally only one person signals the crane operator. That keeps things from getting confusing. But there's one big exception.
The rule says anybody who sees a safety problem gives the stop signal. And the operator has to obey a stop signal, no matter who gives it. A laborer, a carpenter, the newest person on the crew. You see a problem, you stop it.
You don't need to know the whole hand-signal chart for that. You need to know stop, and you need to know you're allowed. You are.
Tag lines
When a load needs to be steadied or kept from spinning, tag lines get used. Hold the tag line, not the load. Keep it from snagging. And never wrap it around your hand or your body. That's good practice, because a load that suddenly moves will take the rope, and the rope will take whatever it's wrapped around.
Near power lines, the rule says tag lines have to be the kind that don't conduct electricity.
Talk it over
- On this job, where is the crane's swing area, and is it marked right now?
- Would every one of us feel okay giving the stop signal to the operator? If not, why not?
Before you go
Stay out of the fall zone unless your job is the load. Never under it. Respect the swing line. And if you see a problem, anybody can call stop.