R Safety Hub R Safety Hub Your prescription for a safer workplace

Working Below the Steel Crew

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. The steel is going up on this job. Beams, columns, joists, decking. The ironworkers have their own rules for working up there. Today is about the rest of us: what happens down here while they work up there.

Here's the simple version. Steelwork drops things. Bolts, tools, scraps, a wrench somebody set on a flange. From that height, small things hit hard.

Nobody works under the steel

Washington's rule says the controlling contractor keeps other work out from under the steel crew, unless there's overhead protection for the people below. So if the steel crew is working above an area, that area is closed to the rest of us, or it has overhead protection over it.

If you see a barricade, tape, or a sign marking off the area under the steel, it means you. Don't cut through it to save a walk. If you think you need to get in there, ask your supervisor first.

Nobody under the load

The rule says hoisting gets planned so nobody works directly below a load hanging off the crane. The only people allowed under it are the ironworkers making the first connection or hooking and unhooking it. And when they're in the fall zone, the load has to be rigged by a qualified rigger and hung on hooks with self-closing latches.

That's not us. If a load is swinging toward where you are, you move. You don't wait for it to clear.

Up there, they secure their stuff

The rule also says materials, equipment and tools that aren't in use up top get secured so they can't fall. That's the steel crew's job, but you're allowed to say something. If you see loose bolts on a beam edge or a bucket sitting on the flange, tell your supervisor.

Space and access

The rule says the controlling contractor keeps access roads into and through the site for cranes, trucks and equipment, with ways to control people and vehicles. And it keeps a firm, drained area with room to store steel and run the erector's equipment safely. So when the steel shake-out area is roped off, it stays that way. That's not extra parking, and it's not a shortcut to the porta-john either.

Your own gear

Hard hat on anywhere near the steel. The rule says wear it wherever things can fall or fly. It's the last thing between you and a dropped bolt. Eyes up when you're walking the site.

Somebody always says, "They're way over on the other side." Steel moves. So do loads. Check again.

Talk it over

  1. Where is the steel crew working today, and which areas below are closed?
  2. What would make it easier for us to get around the steel instead of under it?

Before you go

Nobody under the steel, nobody under the load, stay out of the marked-off area, and hard hat on.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-155-714(1) (materials, equipment and tools not in use while aloft secured against accidental displacement), (2) (controlling contractor bars other construction processes below steel erection unless overhead protection for the employees below is provided); 296-155-704(4)(a) (routes for suspended loads preplanned so no employee works directly below a suspended load except during initial connection or hooking and unhooking), (4)(b) (within the fall zone: rigged to prevent unintentional displacement, self-closing safety latches or equivalent, rigged by a qualified rigger); 296-155-703(3)(a) (adequate access roads into and through the site for derricks, cranes, trucks and other equipment, and means and methods for pedestrian and vehicular control), (3)(b) (firm, properly graded, drained area with adequate space for safe storage of materials and safe operation of the erector's equipment), (4) (preplanning of overhead hoisting), (6) (steel erection under the supervision of a competent person present at the worksite); 296-155-205(3) (hard hat worn on any construction site whenever there is potential exposure to flying or falling objects). Federal: 29 CFR 1926.759(a), (b) (falling object protection; same two duties); 1926.753 (hoisting and rigging). "Steelwork drops things," "small things hit hard," "don't cut through it to save a walk," "you move, you don't wait," "you're allowed to say something," "the shake-out area is not extra parking or a shortcut," "eyes up," "steel moves, so do loads, check again," and the hard hat as "the last thing between you and a dropped bolt" are plain explanation or good practice, not rule text.