Morning, everybody. Today is about respirators. From the paper dust mask to the full-face with cartridges.
Here's the thing about a respirator. It only works if the air goes through the filter. If the air goes around the edge, you're just wearing a very uncomfortable face decoration.
Required or voluntary
There are two kinds of respirator use. Required, and voluntary.
It's required when the company says you have to wear one, or when there's a breathing hazard over the legal limit. Then a whole set of rules kicks in, and we'll get to those.
It's voluntary when nobody requires it and you choose to wear one anyway, like a dust mask while sweeping. That's allowed. But even then, keep it clean, keep track of your own so you don't grab somebody else's, and follow the maker's instructions.
Pick one that's approved by NIOSH, the federal agency that certifies respirators. The approval is on the respirator or its package.
And know what yours can't do. The rule says it plainly: a respirator built to filter dust will not protect you from solvent vapor, smoke, or air without enough oxygen. A dust mask in a paint fog is a bad trade.
When it's required
Before you wear a required respirator, you get a medical evaluation, at no cost to you. The rule says wearing a respirator can be a physical risk every time you put it on, so a licensed health professional checks that you're okay to wear it.
Then you get fit tested, also free, before you first use it and at least every twelve months after. And again if you switch to a different model or size, if your face changes, like weight change, dental work or a scar, or if you tell them it doesn't fit right.
You get trained before you start, and again within twelve months.
The seal
Every single time you put on a tight-fitting respirator, you do a seal check. Every time.
And here's the one that starts arguments. If facial hair gets between your face and the seal, you can't use a tight-fitting respirator. The rule lists stubble, moustaches, sideburns and scars in the sealing area. Yes, stubble. Even a day's worth can break the seal.
Nobody's telling you how to live your life. If the job needs a tight-fitting respirator, though, the seal has to touch skin. The seal rule is for tight-fitting respirators. Loose-fitting ones are handled differently, so talk to your supervisor if this is an issue for you.
Safety glasses and other gear can't get in the way of the seal either.
Get out of the area
Walk out of the work area before you take it off to change cartridges, readjust it, or clean your face. And get out right away if you smell or taste the stuff you're working with, if it suddenly gets harder to breathe, or if you feel dizzy, sick, weak or short of breath. Those are signs something's wrong.
Check it
Look your respirator over before every use. Straps, valves, facepiece, cartridges. If it's cracked, stretched out or not working right, it doesn't get used until it's fixed with approved parts.
Talk it over
- What respirators get used on this job, and for what?
- When did you last do a seal check, and do you know how?
Before you go
Right respirator for the hazard, sealed to skin, checked every time, and get out if something feels wrong.