R Safety Hub R Safety Hub Your prescription for a safer workplace

Silica Dust Basics

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about dust. Specifically, the dust that comes off concrete, brick, block, stone, mortar and fiber-cement siding when you cut, drill or grind it. That dust has silica in it.

The problem with silica is the dust you can't see. Federal OSHA says the dangerous particles are at least a hundred times smaller than beach sand. The rule says the hazards include cancer and lung damage, along with effects on the immune system and kidneys. This isn't a cough that goes away by the weekend.

The limit

Washington sets a legal limit for how much silica dust can be in the air you breathe over a shift. It's tiny. Fifty micrograms per cubic meter. That's an amount you could never see. So we don't try to eyeball it. We control the dust at the tool.

Table 1

Washington's silica rule has a table, called Table 1. It lists common tools and tells us exactly what to do with each one. Follow the table, and we know we're doing it right. If a task isn't in the table, or we can't follow the table exactly, the company has to measure the dust in the air instead and keep it under the limit some other way. Either way, the dust gets controlled. Nobody just hopes.

A few examples. A hand-held power saw on concrete or masonry needs water fed right to the blade. Outdoors, for four hours or less in a shift, that's enough. Over four hours, or anytime indoors, you also wear a respirator.

Cutting fiber-cement siding with a saw blade eight inches or smaller, outdoors, you use a saw with a dust collection system hooked to a vacuum with a good filter. Done right, the table doesn't call for a respirator.

Drilling into concrete, the drill gets a shroud with a dust collector, and you clean out the holes with a HEPA vacuum. Not by blowing into them.

And the tool gets run and maintained the way the maker says. A dust collector with a clogged filter or a water line with no water isn't a control. It's a decoration.

Cleaning up

No dry sweeping or dry brushing silica dust, if wet sweeping or a HEPA vacuum can do the job. A broom on dry concrete dust just puts it back in the air for round two.

And no blowing dust off your clothes or a surface with compressed air, unless there's a system catching the dust cloud, or there's truly no other way.

The plan, and the person

The company has to have a written silica plan, and you can ask to see it. It has to name a competent person, who checks the job, the materials and the equipment regularly. You should know who that person is. If you don't, ask today.

Health checks

If you're required to wear a respirator for silica thirty or more days a year, the company has to offer you medical exams, at no cost to you. Take them. They're for you.

Talk it over

  1. What do we cut, drill or grind on this job that throws silica dust?
  2. Is the water or dust collection on our tools actually working today?

Before you go

Water or vacuum at the tool, no dry sweeping, no blowing it off, and know your competent person.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-840-095 (PEL fifty micrograms per cubic meter, eight-hour average); -110 and Table 1 rows (ii) hand-held power saws, (iii) fiber-cement saws, eight-inch blade or less, outdoors, (vii) drills, HEPA vacuum for holes; -135 (no dry sweeping or compressed air); -140 (written plan, competent person); -145 (medical surveillance at thirty or more days of required respirator use); -150 (hazards named: cancer, lung, immune system, kidney). Federal: 29 CFR 1926.1153. Materials list and "at least a hundred times smaller than beach sand": OSHA, Silica, Crystalline overview, osha.gov/silica-crystalline; fiber-cement: WAC 296-840 Table 1 row (iii).