← All talks
Lines in italics are for the reader, not the crew. This talk is for drivers of the bigger work trucks: a truck, or a truck and trailer together, rated or weighing 10,001 pounds or more. If your trucks cross tracks on a regular route, name that crossing when you get to question 2. How to read a talk
Printable version with sign-in sheet (PDF)
Read this out loud
Morning, everybody. Today is railroad crossings, for anyone who drives one of our bigger work trucks: the dump truck, the flatbed, the truck pulling the equipment trailer.
A train can't swerve, and it can't stop in a hurry. So at a crossing, it's all up to the driver.
Slow down and look
The truck rule says you come up to a crossing slow enough that you could stop before the nearest rail. And you don't drive onto the tracks until you've made sure the way is clear. So look both ways, every time.
When the lights flash or the gate comes down, Washington law says stop, fifteen to fifty feet back from the rail. And never drive around a gate.
Somebody always says, "We can beat it." Nope. We are never that late.
Room on the other side
The rule says you don't start across unless there's room to drive all the way through without stopping.
Why? Your cab can be safe on the far side while your trailer is still sitting on the rails. So look past the tracks first. If traffic is backed up over there, wait on this side.
Low trailers
A low trailer can hang up on a humped or steep crossing. If one looks like trouble, stop short and call your supervisor, and work out another way around together. That's good practice.
Some trucks must stop
Buses carrying passengers, and trucks hauling most placarded hazardous materials, have to make a full stop at crossings, with a few exceptions. If that might be your truck, ask your supervisor.
If you're ever stuck
This is good practice, and it's what Washington's commercial driver guide says too. Get everybody out and away from the tracks. Then look for the blue sign at the crossing. It has the railroad's emergency phone number and that crossing's own number. Call it, or call 911.
People first. The truck comes last.
Talk it over
- You're coming up on the tracks and traffic is stopped on the far side. What do you do?
- What would make it easier for us to get our trucks and trailers across the tracks safely, even on a day when we're running behind?
Before you go
Slow enough to stop, look both ways, room on the other side, and if you're ever stuck, get out and get away first.
Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.
Get started
Reference (not read aloud). Federal: 49 CFR 392.11 (every CMV other than those listed in 392.10 approaches a railroad grade crossing at a speed that permits stopping before the nearest rail, and is not driven onto the crossing until due caution has been taken to ascertain that the course is clear); 49 CFR 392.12 (no driver of a CMV drives onto a highway-rail grade crossing without sufficient space to drive completely through the crossing without stopping); 49 CFR 392.10(a)(1), (3) (every bus transporting passengers, and CMVs required to be marked or placarded with any of eighteen listed classifications, stop within 50 feet of and not closer than 15 feet to the tracks; the talk says "most placarded hazardous materials" because the list is not every class), (b) (five places a stop need not be made, which is why the talk says "with a few exceptions"); 49 CFR 390.5 (commercial motor vehicle: 10,001 pounds or more by rating or weight, whichever is greater, single or combination, among other things); 49 CFR 234.309(b), (c)(4) and 234.311(a)(1) (Emergency Notification System sign: telephone number to report to the railroad, the U.S. DOT National Crossing Inventory number, white text on a blue background, a sign on each approach to the crossing, with exceptions for farm crossings, yards, ports and docks; a Federal Railroad Administration rule for railroads). Washington: WAC 446-65-010(1)(n), (q), (s) (the State Patrol adopts 49 CFR parts 383, 390 and 392 as they exist on April 25, 2026, for motor carriers in intrastate or interstate commerce; last filing shown WSR 26-19-024, effective 10/9/26); RCW 46.61.340(1), (2) (any driver stops within fifty feet but not less than fifteen feet from the nearest rail when a signal warns of a train, a gate is lowered, a flagger signals, or a train is plainly visible and hazardously close, and does not proceed until it can be done safely; no driving through, around or under a gate that is closed or being opened or closed).