R Safety Hub R Safety Hub Your prescription for a safer workplace

Lockout and Tagout for General Industry

GENERAL INDUSTRY: shops, plants and warehouses. For construction sites, use the construction lockout talk instead.

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about lockout and tagout. That's how we make sure a machine can't start up, or let loose stored energy, while somebody has their hands in it.

Machines don't know you're in there. A conveyor doesn't check. A press doesn't ask. And the person who flips the switch back on isn't trying to hurt anybody. They just don't know you're in there. So we don't trust thinking. We trust locks.

What counts as service

The rule's list is longer than most people expect. Setting up, adjusting, inspecting, cleaning, changing a tool, and unjamming. Unjamming is the big one. "It's just a quick clear" is exactly the shortcut this rule is written for.

And the stop button is not a lockout. The rule says push buttons and selector switches don't isolate energy. A button can be pushed back on. A lock can't.

Note for the reader: name a machine in this shop that gets jammed or cleaned.

Two kinds of people

The rule names two roles. An authorized employee is the person who locks out the machine to work on it. They're trained to do it. An affected employee is someone who runs the machine or works near it.

Here's the key. Only the authorized employee doing the work puts their lock on. Everybody else, if you see something wrong, you can tell somebody and keep clear. But you don't lock it out yourself unless you're trained and authorized for that machine. That's how we keep it clear who's in the machine and whose lock is whose.

The steps

The authorized employee knows what kinds of energy the machine has. Electric, air, hydraulic, springs, gravity, heat. The affected people get told before the locks go on. The machine is shut down the normal way, then cut off from every energy source. One lock on every isolating point. Then stored energy gets bled off or blocked, like air pressure or a raised part that could drop.

Then comes the step people skip. Before you touch it, you check that it's really dead. The rule says verify. Lock it, then prove it's dead, the way your procedure says.

Taking the lock off

Only the person who put the lock on takes it off. Not their buddy. Not the supervisor because it's quitting time. There's a narrow exception when that person has left the building, but only with a written procedure. The company has to try hard to reach them and tell them before they come back to work.

Before the lock comes off, the area is checked, tools are out, people are clear, and everybody affected is told it's starting up.

Working as a group

When a group works on one machine, everybody puts their own lock on the group lock box. You keep yours on until you're done. One lead person has overall responsibility, goes on first, and comes off last. If your lock isn't on, you're not protected. Doesn't matter how many other locks are hanging there.

For everybody

The rule says every one of us who works where lockout happens gets told one thing: never try to restart or re-energize equipment that's locked or tagged out. Not to test it. Not because the tag looks old. Find out whose it is.

A tag alone is a warning, not a lock. The rule says tags can give a false sense of security. Respect it anyway.

Talk it over

  1. Which machines here get cleaned or unjammed, and who is authorized to lock them out?
  2. If you found a lock on a machine you needed, what would you do?

Before you go

Stop button isn't lockout. Your lock, your key. Verify before you touch. And never start what someone else locked.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington general industry: WAC 296-803-100 (scope; construction under chapter 296-155 exempt), -099 (authorized and affected employees; service includes unjamming and tool changes; push buttons and selector switches are not energy-isolating devices), -50005 (lockout where it can be locked), -50010 (know the energy; notify affected employees before devices go on; device on each isolating device, applied only by the authorized employee doing the work), -50025 (stored energy), -50030 (verify isolation before work), -50035 (only the employee who applied it removes it; documented-procedure exemption; notify before start-up), -50050 (group lockout; primary authorized employee first on, last off), -60005(4)(b) (all employees told not to restart locked or tagged equipment), -60010 (tags are warnings; false sense of security). Federal: 29 CFR 1910.147(e)(3). "Anyone may tell somebody and keep clear" is good practice, not quoted rule text. "Prove it's dead" means the rule's verification step (50030); the talk teaches no verification method.