Morning, everybody. Today is about one of the oldest bad ideas on a job site. Standing on a pallet on the forks, and having a buddy lift you up to reach something.
It always seems quick. And the forks were built for pallets, not people.
Never ride the forks
Nobody rides the forks. Not on a pallet, not on a bucket, not hanging on the mast. The rule says no unauthorized people ride on a forklift, and anyone who does ride needs a safe place to ride. Bare forks and a pallet are not a safe place.
And nobody stands or walks under the raised forks, loaded or empty. Nobody puts an arm or a leg between the uprights of the mast, where the chains and moving parts are, or outside the edges of the truck while it runs.
If people get lifted, it's on a real platform
When a forklift is used to lift a worker, it has to be on a work platform built for it.
The platform is fastened securely to the carriage or the forks. It doesn't just sit there.
It has standard guardrails and toeboards on all sides.
The space between the platform and the mast is guarded, so nobody can reach the chains or other pinch points.
The forks or carriage can't tilt while people are up there. A locked lever or a strap on the control is one way to do that.
The lift has to be built so that if the system fails, it can't drop faster than a set speed. That's about the truck, not something you check by eye. If you don't know, ask.
And if the truck has controls that ride up with the platform, the people on the platform need a way to shut off the power.
The operator's job
The operator stays with the truck the whole time someone is on the platform. More than twenty-five feet away, or out of sight of the truck, counts as gone. And the operator is in the normal operating position when raising or lowering.
The operator doesn't drive the truck from one spot to another with people up there. Inching it slowly into position is allowed. Driving across the job is not.
The federal construction rule also wants protection from falling objects for the people being lifted, where the job calls for it.
Good practice
Not rule text. Check the forklift's manual and the platform's label before anyone goes up. If either says don't, then don't. And if what you need is a lift, ask for a lift.
Talk it over
- Has anyone here ridden on forks or a pallet to reach something? What would you do instead today?
- If we needed to lift someone on this job, do we have a real platform for it?
Before you go
Nobody rides the forks. Real platform, fastened and railed. Operator stays put. No driving with people up.