R Safety Hub R Safety Hub Your prescription for a safer workplace

Conveyors on the Job

Lines in italics are for the reader, not the crew. How to read a talk

Printable version with sign-in sheet (PDF)

Read this out loud

Morning, everybody. Today is about conveyors. The belt that runs shingles up to the roof, the one that feeds gravel or sand, the one that carries debris off a floor.

A conveyor is a great helper. It saves a lot of backs. But it has one bad habit: it never gets tired, and it never lets go. If it catches a sleeve or a glove, it just keeps pulling.

When it starts

Washington's rule says the operator makes sure everybody is in the clear before starting a conveyor. If they can see the whole length from the start switch, they look. If they can't, the rule calls for a warning you can hear or see, like a horn or a light.

So when you hear that horn or see that light, step clear and stay clear.

It's not a ride

The rule says nobody rides a conveyor belt, chain or bucket elevator. And nobody walks on one, except in an emergency, and then only after the power is off and it can be done safely.

Know where the stop is

The rule calls for a way to stop the conveyor at the operator's spot. In most setups it also calls for an emergency stop you can reach from the conveyor, near where the material goes on. Before you work near one, ask to be shown the stops.

Dress for it

Around moving parts, the rule says clothes fit close to the body. No dangling neck wear, bracelets, watches or rings. Anything loose is a handle for the machine to grab.

Before you reach in

Here's the big one. The rule says a conveyor gets locked out with a padlock any time repair, maintenance or clean-up work is being done on it. A tag, or just pushing the stop button, is not enough.

We treat clearing a jam the same way. A belt that's "just off" can be switched back on by somebody who doesn't know your hand is in there. With your padlock on it, it can't.

If you don't have a lock, or you're not sure how lockout works on this job, ask your supervisor before the belt ever jams.

Somebody always says, "I'll just knock that chunk loose real quick." Nope. Lock it, then knock it.

And if you see a frayed belt, a cracked roller or a guard that's off, tell your supervisor, so it gets fixed before it hurts somebody.

Talk it over

  1. The belt jams with a chunk stuck in it. What has to happen before anybody reaches in?
  2. What would make it easier for us to work safely around a conveyor, even on a day when it keeps jamming and we're in a hurry?

Before you go

Clear before it starts, nobody rides it, know where the stop is, and padlock it before you reach in.

Short on time, or no one to lead it? Doc and Red can run this talk for you in the R Safety Hub app.

Get started

Reference (not read aloud). Washington: WAC 296-155-77120(2)(a), (b) (operator visually checks that all persons are in the clear when the entire length is visible from the starting switch; a positive audible or visible warning system when it is not), (3)(a), (b) (riding on conveyor chains, belt or bucket elevators prohibited; no walking on conveyors except for emergency purposes, and then only after the conveyor is deenergized and the person can do so safely), (4)(a) (means for stopping the motor or engine at the operator's station), (8)(a), (b), (c) (panic-type emergency stopping device that can be reached from the conveyor, near the material entrance; not mandatory where an operator with full view of the material entrance has constant control and cannot fall onto the conveyor, which is why the talk says "in most setups"), (9)(a), (b) (locked out with a padlock at any time repair, maintenance or clean-up work is being performed; tags or push-button stops not acceptable), (11)(a) (any part showing signs of significant wear carefully inspected and replaced before it may create a hazard; the talk only asks the crew to report what they see, and does not say "the rule says" there); WAC 296-155-200(2)(b) (where there is a danger of contact with moving parts of machinery, clothing fits closely about the body; no dangling neck wear, bracelets, wristwatches, rings or similar articles). Federal: 29 CFR 1926.555(a)(1) (stopping means at the operator's station; audible warning signal sounded immediately before start-up), (7) (locked out or otherwise rendered inoperable, and tagged out with a "Do Not Operate" tag, during repairs and when operation is hazardous to employees doing maintenance). Washington allows an audible or a visible warning and only where the whole length cannot be seen; the federal rule says an audible signal. Washington's padlock rule is stricter than the federal wording.